| Microscan AN300 Series Alarms -AN312 Model - £84.99
|
  |
Microscan AN300 Series Alarms
The Microscan AN300 Series incorporates all the features of the AN200 series by ACTIVELY protecting your vehicle and contents before a break-in using a choice of two-stage shock sensors or dual zone microwave technology. These compact alarms come with a 120dB siren and in addition to this the AN300 series comes as standard with a voice! |
The Talking Car Alarm!
With the AN300 series you have voice confirmation of arming and disarming as well as a voice warn away system. The system will confirm it is alarms with a "System Armed" message and disarmed with "System Disarmed". If an attempt is made to break into your vehicle and the two stage shock sensor is activated (or approaches the perimeter of the car on the AN314 model) the alarm will produce a warn away message "Protected by Security System, Please Stand Back".
Features:
- Remote control - for arming and disarming the alarm.
- Status LED - illuminated when alarm is on to remind you and warn off thieves.
- 5 Tone 120dB siren with battery back-up facility - this means that the alarm will continue even if it is disconnected from the car battery.
- Pin switch - additional switch for bonnet or boot.
- Voltage sensing - the alarm will react to a change in car voltage when armed, like when the engine is started for example.
- Direct switching - detects the opening of doors, bonnet or boot and triggers the siren.
- Panic mode - if attacked, holding down the arm button on the remote will active the alarm.
- Central locking outputs*
- Fully upgradeable.
- Second remote control - for spare car keys.
- Immobiliser - passively armed, it stops the car from being started
The AN312 has all the features of the AN311 but comes with an additional transmitter and for added security an automatic immobiliser which can be used to disable any circuit on the vehicle including the starter motor.

|
£84.99
£72.33 (ex VAT)
|
|
* Central Locking
Please note the AN200 and AN300 series of alarms can only be connected to "low neg" central locking systems without the use of an AN0012 Central Locking Interface, Fords and BMWs are cars that require the AN0012. Also an additional Central Locking Motor and Central Locking Interface may be required if the central locking system can be activated from the drivers door only.
Any questions we haven't answered, then please email us or
call the manufacturers technical support line 0870 787 5700.
|