The AML 201 Alcohol Analyser - £Out of Stock Premier Edition Includes 3 x AAA batteries, carry case, 45 reusable straws

Alert Signals The unit is designed to alert the user in the following ways:- Low Level - At 0.2‰ BAC or below a ‘LO' indicator will appear on the LCD. Safety Level - For measurements between 0.2‰ BAC and 0.4‰ BAC the alcohol concentration level will be displayed as per the bar indicator. Warning Level - For measurements within the range 0.5‰ BAC and 0.7‰ BAC the unit beeps 3 times accompanied by ‘No Driving' sign flashing 3 times. The alcohol concentration level will also be displayed as per the bar indicator. Alert Level - For measurements equal to or above the alert concentration level limit (0.8%o BAC current UK drink driving limit as at August 2001), the unit beeps and a ‘No Driving' sign will flash for 15 seconds. The Alcohol concentration level will also be displayed as per the bar indicator. The ‘No Driving' sign will then remain on the LCD.

Operating Instructions

1. Remove the battery compartment cover and put in 3 X AAA size 1.5V alkaline batteries and close the cover.
2. Refrain from drinking and smoking for at least 20 minutes and rinse your mouth with water.
3. Insert a plastic straw into the gas hole on the top of the machine.
4. Power on the unit by pressing the ‘ON / OFF' key once, the unit will perform a simple test function which takes approximately 18 seconds. During this time the Bar Indicator will move forwards and backwards along the display.
5. The unit is ready to test when the ‘READY' message appears on the LCD display accompanied by 2 long beeps.
6. Press and hold the ‘BLOW' key and at the same time blow continuously through the plastic straw for at least 5 seconds until a beep sound is heard to prompt the user to stop blowing. Readings will then be graphically expressed on the bar indicator. A measurement of less than 0.2%o BAC will obtain a ‘LO' indication in the display. A measurement above 0.2%o BAC and the alert alcohol concentration level will be displayed with the bar indicator. The UK drink-driving limit is 0.8%o BAC.
7. In order to perform a repeat test, press ‘START' key and wait approximately 12 seconds for a test routine to be performed. Once ‘READY' appears and the unit beeps twice, follow step 6 above.

Specifications

• Range: 0.2 ~ 1.2 ‰ BAC - Accuracy: ± 0.2‰ BAC at alert level
• Power Input: 3 X 1.5V AAA batteries
• Display: Graphic LCD display with backlighting
• Auto power off: 2 minutes
• Breath sampling: => 5 seconds continuous breath sample
• Recycle time: ~30 seconds
• Dimensions: 105mm(H) x 45mm(W) x 24mm(D) approx.
• Weight: 50g excluding batteries, 85g including
• Alert level calibrated: 0.8 ‰ BAC (UK drink-driving limit as at August 2001, 35mg per 100ml breath)
• Agency Approval: EMC DIRECTIVE 89/336 EEC (CE MARKING)
• Accessories: 18 pcs blowing tubes, PVC case, 3 X 1.5V AAA batteries, 2 X Cleaning caps